Menu

İnşaat Materialları və Alətləri

header photo

Flap Brushes: Scotch-Brite™ Cut and Polish Flap Brush Steel Core

Our Scotch-Brite™ Cut and Polish Flap Brush Steel Core features flaps of tough, dense webbing that allows aggressive blending, cleaning and deburring of metals. The flaps are bonded around a steel support core, so the brush stays sturdy when run on finishing equipment. This creates a firm support for the softer mesh material that removes surface contaminants without damaging the work piece.

  • Tight and dense construction allows for aggressive blending, cleaning, and polishing on metal surfaces
  • Open web design resists loading and assures consistent action across the sheet
  • Flaps are bonded to a steel core for maximum strength and durability
  • Extremely durable material provides a long lifespan for the brush
  • Made with aluminum oxide mineral for sharp cutting action

Tough and Flexible

Our Scotch-Brite™ Cut and Polish Flap Brush Steel Core is made to be your go-to choice for aggressive blending and finishing. This cleaning brush is constructed by firmly attaching mesh flaps around a steel core to make a wide and round brush used for cleaning and finishing applications on wide sheet and coil metal. The core provides durability and long life, while the softer, abrasive infused mesh flaps cut quickly and evenly. Typical applications for our flap brushes include finishing, graining, light deburring, and light cleaning. 

Aluminum Oxide Abrasive

This flap brush uses aluminum oxide abrasive, which is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. 

The Scotch-Brite™ Advantage

Our Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

Specifications

 Applications‎‎ Grinding,‎ Finishing,‎ Polishing
 Attachment Type‎‎ Center Hole
 Brand‎‎ Scotch-Brite™
 Center Hole Diameter‎‎ 5.75 Inch
 Center Hole Diameter (Metric)‎‎ 146.05 mm
 Color‎‎ Tan
 Converted Form‎‎ Flap Brush
 Density‎‎ 7,‎ 5
 Density Rating‎‎ Medium,‎ Hard
 Diameter‎‎ 11.5 Inch
 Diameter (Metric)‎‎ 292.1 mm
 Equipment - Machines‎‎ Manual Backstand
 Form Type‎‎ Flap Brush
 Grade‎‎ VFN,‎ MED
 Industries‎‎ Metalworking
 Max RPM‎‎ 1800
 Mineral Type‎‎ Aluminum Oxide
 Position‎‎ Better
 Product Form‎‎ Brush
 Sub Industries‎‎ Metal Fabrication
 Width‎‎ 38.5 Inch
 Width (Metric)‎‎ 977.9 mm

Go Back

Comments for this post have been disabled.

Blog Search

Blog Archive

Comments

There are currently no blog comments.